The box measures 7x5 inches and is 2.5 inches deep, I added some ribbon, tags and simple embellishments. Make yours to match your own style and decor.
What you need:
2 pieces of basic cardstock (12x12 or 8.5x11)
1 piece of patterned cardstock
Embellishments of your choice
Double sided tape (I used Inkssentials Wonder Tape, by Ranger)
Tools: Paper trimmer, score board, and 2" circle punch,
Cut one
11x7 inch piece of basic cardstock
This will be scored on the long side at:
.5” , 3”, 8” and 10.5”
Make a diagonal cut on what will
be the sides of the box.
Cut one 7x6
inch piece of basic cardstock
This will be scored on the long
side at:
.5” and 3”
Then scored on the short side
at:
.5” and 5.5” – Trim the corners.
Cut a half circle on the front
with 2” circle punch
Cut the
patterned paper as follows:
Front piece is cut at 3 7/8” x 4
7/8” . Mark the centre and punch a half
circle with 2” circle punch
Two side pieces are cut at 6
7/8” x 2 3/8” . Line these up with the
box sides and trim to fit the diagonal.
 |
| Pre-cut basic cardstock and patterned pieces |
 |
| Score the l1x7 inch piece to form back and sides of box. |
 This will form the back and sides of your box. Trim the sides on an angle. Do this now. |
 |
| Score the 7x6 inch basic cardstock , fold, and notch the corners of each fold, as shown This will form the front and bottom of your box |
The scored ends will form the bottom. The straight piece will make your front - trim 1/2" off the sides of your front piece. Use Now trim 1/2 inch off the piece that will form your box front.
Use your circle punch to punch a half-circle on the front panel.
Attach your patterned paper to the appropriate panels, then use the double sided tape to finish off the card box. Embellish as desired.http://www.scrapperscoveinvermere.net
No comments:
Post a Comment